Canon CLC1000 Service Manual page 288

ADJUST
I t e m
B O D Y "C
The setting of this item will return to the default value when the PCB is replaced or the RAM Is cleared,
requiring input once again. Be sure to record any new setting you have made on the service label.
mode will effective
This prove
COPYRIGHT 0 1997 CANON INC.
BODY
XxXx XxXx
Description
ed copy or on the 1st side of a
or on the 1st side of a two-sided
correcting transfer faults under each item In queStiOn.
when
CANON CLClOOO REV.1 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
XXXX
Same as the reading
under 'DISPLAY' +
Settings: -5 to +5
or on the 1st side
or on the 1st side
<F>
Remarks
3 - 2 6 1