Power On Configuration - Advantech UNO-3072A User Manual

Intel dual core atom embedded automation computer with two/four pci slot extensions

Table of Contents

2.6.2 Power On Configuration

Default configuration after power on or hardware reset is to set all the iso-

lated digital output channels to open status (the current of the load can't be

sink) so that users need not worry about damaging external devices during

system startup or reset. When the system is hot reset, then the status of iso-

lated digital output channels are selected by jumper CN27. Table 2.18

shows the configuration of jumper CN27.

Table 2.7: Digital Output Power On Configuration

CN27

UNO-3072A/3074A User Manual

Figure 2.7: Location of CN27

Power on configuration after hot reset

Reset all digital output

Default setting

Keep last status after hot reset

Table of Contents

Uno-3074a