Turning On The Power - Yamaha MusicCast MCX-CA15 Install Manual

Before using your client for the first time, you must
upgrade the MusicCAST system and make the
appropriate network settings. For details on network
settings, refer to "BEFORE USING THE
MusicCAST SYSTEM" and "CONFIGURING
THE CLIENT" in the Install Manual provided.
When your client is ready for operation, turn on the
power.
The client has two operation modes:
On
The client is connected to a power
source and is in operation mode.
Sleep The client is connected to a power
source and activates only when the
unit is operated or it receives an
infrared signal from the remote
control.
LIBRARY
MUTE
1
MENU
GROUP
MENU
1
1
14

TURNING ON THE POWER

MCX-3 WD01440
1
VOL
FAVORITES
2 3 4
SELECT
BOOKMARK
PLAY
INPUT
INFO.
PAUSE RANDOM
1 2 3
STOP REPEAT
4 5 6
PLAY GROUP RECALL
7 S
OFF TIMER ON TIMER
or
MCX-C15
VOL
2 3 4
FAVORITES
Before proceeding, make sure the power to
the MCX-1000 server is turned on.
1
Press on either the remote control
or front panel.
The client turns on and the MusicCAST Startup
screen is displayed.
2
The client attempts to connect to the
server, and the following screen is
displayed.
Connecting...
3
If the client is able to make a
connection, the Top Menu screen
appears and the network connection
icon appears in the top right corner of
the display.
Top Menu
Library
Recall Play
If the client is unable to connect to the server, it
continues displaying the "Connecting..."
message. Press any button on the client to
cancel the connection process, then check that
your client network connection settings are
correct (see page 55).
Note
If no operation is performed for 30 minutes, the
client automatically switches to sleep mode. Press
SELECT or to reactivate the client.
Network
connection icon