Yamaha MusicCast MCX-CA15 Install Manual page 96

■ Using AV link
MCX-3 WD01440
LIBRARY
MUTE
button MUTE
1
b / a
MENU
buttons
PAUSE
1
4
GROUP
/
– (GROUP)
7
OFF TIMER ON TIMER
+ (GROUP)
buttons
To change the volume output level of the connected
YAMAHA AV receiver:
Press VOL – / VOL + .
To mute the volume output level of the connected
YAMAHA AV receiver:
Press MUTE.
To switch the preset group for playback on the
connected YAMAHA AV receiver:
Press – (GROUP) / + (GROUP).
To switch the preset station for playback on the
connected YAMAHA AV receiver:
Press b / a .
To switch the input of the connected YAMAHA AV
receiver to play back songs selected from the client:
Press INPUT.
/
VOL –
VOL
VOL +
buttons
FAVORITES
2 3 4
SELECT
INPUT
button
BOOKMARK
PLAY
INPUT
INFO.
RANDOM
2 3
STOP REPEAT
5 6
PLAY GROUP RECALL
S
LISTENING TO EXTERNAL COMPONENTS
Notes
• Depending on the YAMAHA AV receiver you
are using, pressing MUTE may not have any
affect.
• You can only use – (GROUP) / + (GROUP) and
b / a when the input of your connected
YAMAHA AV receiver is set to TUNER.
• When a YAMAHA AV receiver is selected in the
"Amplifier" menu, you can cycle through the
available inputs for that receiver by pressing
INPUT on the client's remote control. However
the input you specified for the connection of the
client in the "Amp Input" menu does not appear
in that cycle. To select the input you specified for
the client, press INPUT repeatedly and select
"Server".
• When RX-396RDS or RX-496RDS is selected
in the "Amplifier" menu, the YAMAHA AV link
does not support TAPE2 input.
45