Recall Play; What Is "Recall Play; Using A Musiccast Client As A Destination Component - Yamaha MusicCast MCX-CA15 Install Manual

Recall Play

What is "Recall Play"?

The recall play function copies the currently playing song and playback settings from a
source MusicCAST server or client to a destination MusicCAST component, then
starts playback on the destination component. You can select either the MusicCAST
server or a MusicCAST client as a destination component.
Example: To continue listening to a song currently playing on a MusicCAST client in the
den, from a MusicCAST client in a bedroom.
Using a MusicCAST client as a destination
component
Starting Recall Play (Starting Recall play on a
MusicCAST client from the MusicCAST client.)
1
Press and hold MENU for about two seconds. When the Top Menu
screen appears on the display, use u/d to select "Recall Play".
Recall Play
If the source component is not
currently playing back a song,
the destination component
recalls playback information
from the point at which you last
stopped playback on the source
component.
The destination component
recalls playback modes such as
Random, Repeat, and
Broadcast from the source
device.
Operating the source
component after you activate
Recall Play does not affect the
destination component.
Note
You cannot recall playback
information from the MusicCAST
server when it is playing back a
CD, MP3 CD, or a song recorded
from an external device.
MusicCAST client names
You can edit the names of the
MusicCAST clients listed on the
Recall Play screen (see page 92
of the MCX-1000 owner's
manual).
Using the remote control
to start Recall Play
Press and hold RECALL on the
destination MusicCAST client
remote control then press one of
the following keys.
Keys
S PLAY INFO. key Server
1 ON TIMER key
2 REPEAT key
3 RANDOM key
4 key
b
5
e PAUSE
6 key
a
7 key
w
MusicCAST Version Upgrade 1
Source
devices
Client1
Client2
Client3
Client4
key Client5
Client6
Client7
3