Yamaha MusicCast MCX-CA15 Install Manual page 22

1
Press STANDBY/ON on the server.
The server switches to the standby mode.
2
Press STANDBY/ON once more.
The server restarts.
If the Top Menu screen appears after the server
restarts, the recovery operation is complete.
If the recovery operation starts again, follow the
on-screen instructions, then restart the server
once more.
• Case2
The Top Menu screen appears (there may be
some display noise) and the system
operates normally
Carry out the version upgrade procedure for the
server once more (page 19).
• Case 3
The Top Menu screen appears but the
system does not operate normally
• The server does not restart normally
Contact the store of purchase or your nearest
YAMAHA dealer.
BEFORE USING THE MusicCAST SYSTEM
If the version upgrade fails due to a power cut or for
any other reason, restart the client and follow the
procedure below.
If the version upgrade is successful, "3.0.x" appears
in the "Version" field of the Information screen. For
details, see the MCX-A10 Owner's Manual, page
64.
Be careful not to select "System Reset" instead of
"System Update". If you select "System Reset" by
mistake, the network settings of the client will be
reset to the default settings.
• Case 1
The Setup screen appears instead of the
Top Menu screen
t·~et.'.IJor·k
:; 5
1
::1::'
t.ep·,
Cont.r·a:::.t.
1
Press
A /
v
to choose "System" and
"System Update".
The System Update screen appears.
I nfor,p·,at.i on
:; 5
1
::1:::.
t.ep·, Updat.e
5
1
::1::'
t.er
l
·'
~~e::.et.
t
Uer::.ion:1a0a2backup
Dat.e:
2t1~]3""'(15""'22
11:
54:
~:1~:1
Pre::.::.
PL~Y
t.o updat.ea
Sample screen display
21
1
Press STANDBY/ON on the server.
The server switches to the standby mode.
2
Press STANDBY/ON once more.
The server restarts.
If the Top Menu screen appears after the server
restarts, the recovery operation is complete.
If the recovery operation starts again, follow the
on-screen instructions, then restart the server
once more.
• Case2
The Top Menu screen appears (there may be
some display noise) and the system
operates normally
Carry out the version upgrade procedure for the
server once more (page 19).
• Case 3
The Top Menu screen appears but the
system does not operate normally
• The server does not restart normally
Contact the store of purchase or your nearest
YAMAHA dealer.
BEFORE USING THE MusicCAST SYSTEM
If the version upgrade fails due to a power cut or for
any other reason, restart the client and follow the
procedure below.
If the version upgrade is successful, "3.0.x" appears
in the "Version" field of the Information screen. For
details, see the MCX-A10 Owner's Manual, page
64.
Be careful not to select "System Reset" instead of
"System Update". If you select "System Reset" by
mistake, the network settings of the client will be
reset to the default settings.
• Case 1
The Setup screen appears instead of the
Top Menu screen
t·~et.'.IJor·k
:; 5
1
::1::'
t.ep·,
Cont.r·a:::.t.
1
Press
A /
v
to choose "System" and
"System Update".
The System Update screen appears.
I nfor,p·,at.i on
:; 5
1
::1:::.
t.ep·, Updat.e
5
1
::1::'
t.er
l
·'
~~e::.et.
t
Uer::.ion:1a0a2backup
Dat.e:
2t1~]3""'(15""'22
11:
54:
~:1~:1
Pre::.::.
PL~Y
t.o updat.ea
Sample screen display
21