To Reset Function Key Settings - Yamaha MusicCast MCX-CA15 Install Manual

Resetting specific data or settings

To reset function key settings

The function keys (FUNC 1, FUNC 2, FUNC 3) are located on the remote controller of
the MusicCAST server. You can assign a specific function to each key (see page 12 of
the "Version Upgrade 1" section in this manual). Follow the procedure below to reset
the function key assignment settings.
1
Select "Top Menu" ➞ "System Setup" ➞ "Remote Controller -
Function Keys".
The Remote Controller - Function Keys screen appears.
2
Use u/j/d/i to select "Default" and press SELECT.
To cancel the reset, select "Cancel" and press SELECT.
The default function name appears in each assignment selection field.
3
Use j/i to select "OK"" and press SELECT.
To cancel the reset select "Cancel" and press SELECT.
The function key settings are reset to the default settings.
34 MusicCAST Version Upgrade 2
Default function key
settings
The default settings for the
function keys are as follows:
FUNC 1: AV Receiver VOL-
FUNC 2: AV Receiver VOL+
FUNC 3: AV Receiver MUTE