Turning The Power On/Off - Yamaha Disklavier ENSPIRE DKC-900 Owner's Manual

Turning the Power On/Off

 Turning the Power On
1
Make sure that the main switch on the power supply unit/
inlet box is turned on.
In the case of Grand piano
Power supply
unit (located
underneath
the piano)
ON OFF
MAINS
Under normal use, the power switch of the power supply unit remains
on, but there is no problem, but if you do not use it for a long period of
time or if you feel something wrong, turn off the power supply unit and
turn the power cord from the outlet.
2
Press the [P] (Standby/On) button.
The [P] indicator flashes slowly (every one second).
Flashing slowly
After several seconds, the [P] indicator lights up. This product is now
ready for use.
 Turning the Power Off (Standby)
1
Press the [P] (Standby/On) button.
The [P] indicator flashes (every 0.5 seconds).
Flashing
After several seconds, the [P] indicator lights up dimly.
In the case of Upright piano
Power supply
unit (located
on the rear)
Chapter
2
Getting Started
15