Sleep Mode - Yamaha MusicCast MCX-CA15 Install Manual

4
Press u / d to choose "Variable" or
"Fixed" and press SELECT.
AUDIO OUT
Variable
Fixed
Variable Controls the playback volume and
tone using the client settings.
Fixed Controls the playback volume and
tone using the external component
settings. In this case, you cannot
control the playback volume and
tone using the client.
Notes
• If "Fixed" is selected in step 4, the volume output
level of your client is set to maximum. In this case,
adjust the volume level on the connected
component before starting playback.
• The "AUDIO OUT" menu is only available when
"MCX-CA15" or "MCX-IB15" is set in the
"Amplifier" menu, or the I/O box is connected to
your client. If you try to access the "AUDIO
OUT" menu at any other time, the message
"Prohibited" appears in the display.

Sleep mode

If you will not be using your client for an extended
period, you can place it in sleep mode. Power
consumption is reduced in sleep mode, but the client
still consumes a small amount of power to keep the
display and remote control signal receiver in
operation.
MCX-3 WD01440
LIBRARY
VOL
MUTE
FAVORITES
1 2 3
SELECT
PLAY
MENU INPUT
INFO.
PAUSE
1 2 3
STOP
4 5 6
GROUP PLAY GROUP
7 S
OFF TIMER ON TIMER
Press .
The message "Please wait." is displayed and the
client switches to sleep mode.
The current time appears in the display.
Please wait.
y
To display the time correctly, check the server
connections, or change the time display setting on
the server as follows:
Press u / d to choose "System Setup" - "Date/
Time" - "Time Display", then choose "24 hours" or
"12 hours (AM/PM)", and press SELECT. Press
u / d / j / i to choose "OK" and press SELECT.
Note
The client automatically switches to sleep mode if
no operation is performed for 30 minutes.
SYSTEM OPTIONS
button
4
BOOKMARK
RANDOM
REPEAT
RECALL
PM
49