Before Using The Remote Control; Replacing The Battery In The Remote Control - Yamaha MusicCast MCX-CA15 Install Manual

SUPPLIED ACCESSORIES
Before using the remote
control
When the remote control is shipped, a thin piece of
plastic film is placed between the battery and remote
control circuitry to prevent operation during
shipping. You must remove this film before using
the remote control for the first time.
Replacing the battery in the
remote control
If you find that the remote control needs to be used
closer to the front panel than usual, the battery is
weak. Replace the battery with a new one.
1
Slide the battery holder out of the
remote control by pushing a pointed
object (such as a ball-point pen) into the
hole in the holder.
2
Remove the used battery and insert the
new one in the holder so that the "+"
(positive) mark faces upward.
3
Slide the holder back into the remote
control.
Note
The casing of the remote control is very stiff, and
may require significant pressure to remove the
battery holder.
6
■ Notes on the lithium battery
Please take care when using the lithium battery as it
may explode if mistreated.
• Please use a CR2025 lithium battery.
• Do not recharge the battery.
• Never abuse or disassemble the battery.
• When replacing the battery, make sure the
polarity is correct. If inserted incorrectly, it may
cause a fire or explosion.
• Avoid placing the lithium battery or the remote
control with the battery installed in places of
high temperature, such as in direct sunlight.
• Keep the battery out of reach of children. If
swallowed, seek medical help immediately.
• If the battery leaks, dispose of it immediately.
Avoid touching the leaked material or letting it
come into contact with clothing, etc. Skin
contact may result in burns. If this occurs, wash
the affected area with water promptly and seek
medical attention.
• When disposing of the battery, insulate it with
tape, etc. Never dispose of it in a fire. Further,
dispose of the battery according to local
regulations.