Yamaha MusicCast MCX-CA15 Install Manual page 41

TURNING ON THE POWER
Moving the controller in the directions indicated on
the front panel of the client performs the same
action as pressing the equivalent cursor key on the
remote control. For example, pushing the client
controller upwards produces the same result as
pressing
A.
on the remote control. Pushing the
controller directly into the front panel has the same
effect as pressing SELECT on the remote control.
Controller
I
1...-
/-_a.J
OYAJDHA! Within 7 m (23 ft)
' - - - - - - - 1 '_ _. _ _
of the remote
• control signal
I
receiver
~·~l
~006
~
;A~
~!!g
The remote control transmits a directional infrared
beam. Be sure to aim the remote control directly at
the remote control signal receiver on the front panel
during operation.
• Handling the remote control
Do not spill water or other liquids on the remote
control.
Do not drop the remote control.
Do not leave or store the remote control in the
following types of conditions:
- high humidity, such as near a bath
- high temperature, such as near a heater or
stove
- extremely low tempe.ratures
- dusty places
CAUTIONS
If remote control operation of this unit causes
abnormal operation of any other component,
change the placement of that component.
Make sure the remote control signal receiver is
not exposed to direct sunlight or strong light.
Such exposure may inhibit the remote control's
functionality.
6
TURNING ON THE POWER
Moving the controller in the directions indicated on
the front panel of the client performs the same
action as pressing the equivalent cursor key on the
remote control. For example, pushing the client
controller upwards produces the same result as
pressing
A.
on the remote control. Pushing the
controller directly into the front panel has the same
effect as pressing SELECT on the remote control.
Controller
I
1...-
/-_a.J
OYAJDHA! Within 7 m (23 ft)
' - - - - - - - 1 '_ _. _ _
of the remote
• control signal
I
receiver
~·~l
~006
~
;A~
~!!g
The remote control transmits a directional infrared
beam. Be sure to aim the remote control directly at
the remote control signal receiver on the front panel
during operation.
• Handling the remote control
Do not spill water or other liquids on the remote
control.
Do not drop the remote control.
Do not leave or store the remote control in the
following types of conditions:
- high humidity, such as near a bath
- high temperature, such as near a heater or
stove
- extremely low tempe.ratures
- dusty places
CAUTIONS
If remote control operation of this unit causes
abnormal operation of any other component,
change the placement of that component.
Make sure the remote control signal receiver is
not exposed to direct sunlight or strong light.
Such exposure may inhibit the remote control's
functionality.
6