Atx Power Mode; Powering On The System; Powering Off The System - IEI Technology AFL2-12A-D525 User Manual

ATM
Self-service kiosk
Plant environment monitoring system
Factory automation platform
Manufacturing shop flow

4.6.2 ATX Power Mode

With the ATX mode selected, the AFL2-12A-D525 panel PC goes in a standby mode
when it is turned off. The panel PC can be easily turned on via network or a power switch
in standby mode. Remote power control is perfect for advertising applications since the
broadcasting time for each panel PC can be set individually and controlled remotely. Other
possible application includes
Security surveillance
Point-of-Sale (POS)
Advertising terminal

4.7 Powering On the System

To power on the system, follow the steps below:
Step 1: Locate the Function and Brightness Up function keys. See Section 1.2.1.1.
Step 2: Hold down the Function and Brightness Up buttons for three seconds to power
on the system.

4.8 Powering Off the System

To power off the system, follow the steps below:
Step 1: Locate the Function and Brightness Up function keys. See Section 1.2.1.1.
Step 2: Hold down the Function and Brightness Up buttons for six seconds to power off
the system.
Page 34
AFL2-12A-D525 Series Panel PC
Step 0:
Step 0: