Removing Discharge Air Grille - Hitachi RPI-0.8FSG1 Service Manual

2.9.3 Removing Discharge Air Grille

(1) Remove the side covers according to the item 2.9.2 "Removing Side Cover".
(2) Remove the screw connecting the AS motor assembly and the discharge air grille, and remove the
stopper.
Screw
(3) Remove the screw supporting the bearing at the left side, pull out the discharge air grille including the
bearing, and pull out the discharge air grille from the right side of the bearing.
Bearing
TURN OFF all power source switches.
Stopper
Screw
2
1
Tool Phillips Screwdriver
Connector for AS Motor
Tool Phillips Screwdriver
Discharge
Air Grille
SERVICING
(2.9 Ceiling Type)
2-105