SERVICING
(2.1 Outdoor Unit)
(9) Draw the compressor and remove it.
Check to ensure that the compressor dose not come off the fixing base at this work.
NOTE:
Do not remove the water-proof cover, oil heater
and slide base from the compressor when
drawing work.
(10) Remove the 4 special nuts, 4 vibration proof rubbers, water-proof cover, oil heater and slide bases
from the compressor.
NOTE:
The special nuts, vibration proof rubbers, slide bases, oil heater and water-proof cover are used
again when reassembling.
Keep them in a box so that the parts are
stored correctly.
2-22
TURN OFF all power source switches.
Special Nut
Vibration-proof Rubber
Oil Heater
Adjustable Wrench or Spanner,
Tool
Phillips Screwdriver
Pull towards front side.
Adjustable Wrench or Spanner,
Tool
Phillips Screwdriver