Removing Heat Exchanger - Hitachi RPI-0.8FSG1 Service Manual

SERVICING
(2.6 Wall Type)
TURN OFF all power source switches.

2.6.8 Removing Heat Exchanger

(1) Remove the front panel according to the item 2.6.2 "Removing Front Panel".
(2) Remove the electrical box according to the item 2.6.5 "Removing Electrical Box Cover".
(3) Remove the drain pan according to the item 2.6.7 "Removing Drain Pan".
(4) Remove the piping stay at the rear side of the indoor unit.
Tool Phillips Screwdriver
Heat Exchanger
Rear Piping of Heat Exchanger
Screws
Piping Stay
Rear Side of Indoor Unit
(5) Release the catch holding the left side of the heat exchanger and remove one screw fixing the heat
exchanger.
Screw
Release Catch
2-88