SERVICING
(2.3 In-the-Ceiling Type)
2.3.4 Removing Electronic Expansion Valve and Thermistors
(1) Remove three (3) screws fixing the heat exchanger cover and remove the heat exchanger cover.
(2) Remove four (4) screws fixing the maintenance
cover and remove the maintenance cover.
(3) Remove the electronic expansion valve by using two (2) spanners.
(4) Remove the thermistors attaching the pipe of
heat exchanger.
2-54
TURN OFF all power source switches.
Heat Exchanger Cover
Expansion Valve
Tool
Screws
Screws
Tool
Phillips Screwdriver, Spanner
Phillips Screwdriver
Maintenance Cover
Thermistor