Setting Cursor Display; Display Setting Of Sea Bottom Line - JRC JFE-700 Instruction Manual

Setting Cursor Display

◎The cursor display method in a standard mode and a history mode is selected.
・ Depth cursor can move to the depth of touch position when depth cursor is displayed.
・ After cursor moving ,use

Display setting of sea bottom line

◎ Select whether to simplify the sea bottom echo notation.
・ Touch and the settings will be displayed.
Set content： OFF/ON/AUTO
OFF：The Depth cursor is not always displayed
ON： The Depth cursor is always displayed.
AUTO： The Depth cursor disappears from the screen when the
non-operation time reaches 30 seconds. When the depth
cursor disappears, tap the screen to redisplay it.
・ Change the settings with
・ After setting, touch
and for adjusting depth cursor.
・ Touch
Set content
OFF ： Normal echo display.
ON ： Shows a red line on the edge of the sea bottom echo.
・ Change the settings with
・ After setting, touch
4-9
, .
.
and the settings will be displayed.
： OFF/ON
,
.
.
4. Operation