Installing A Processor - QUANTA STRATOS S210 Series S210-X12MS Technical Manual

I H
NSTALLING ARDWARE

Installing a Processor

Prerequisite: Prerequisite:
Remove the top cover. See Opening the Top Cover on
page 2-2.
Remove the CPU heat sink. See Removing a Heat Sink
on page 2-20.
1. Align the gold triangle identifying pin 1 of the processor
with the triangular cutout of the processor, and the four (4)
indents on processor with the four (4) tabs on socket.
Pin 1
Figure 2-29. Installing the Processor
2. Insert the processor into the socket, ensuring the four
keys on the socket fit into the corresponding keys on the
processor.
WARNING!
!
The processor should fit easily into the socket. Do not
force the processor in place.
3. Lower the processor load plate over the processor

Indent
Figure 2-30. Closing the Processor Cover
4. Push the left processor locking lever down and latch it
into the locked position
pops out as the latch is engaged.
Tab
5. Push the right processor locking lever down and latch it
into the locked position
Note:
Use the socket cover to protect the socket when the socket is
empty.
2-24
I P
NSTALLING A ROCESSOR


 . The protective plastic cover
 .
 .