Installing A 3.5" Hard Disk Drive - QUANTA STRATOS S210 Series S210-X12MS Technical Manual

I H
NSTALLING ARDWARE

Installing a 3.5" Hard Disk Drive

1. Align the 3.5" hard drive tray with the new hard drive and
secure with the four (4) screws
Figure 2-11. Installing a 3.5" HDD on the Tray
2. Align the tray assembly with the HDD bay and insert the
HDD until it is fully seated in the bay.
3
Figure 2-12. Installing a 3.5" Hard Drive
WARNING!
!
Do not force the tray handle closed. If resistance is
encountered, check the hard drive is properly inserted and the
hard drives on either side are properly inserted.
3. Push the tray handle closed.
2-8
I 3.5" H D D
NSTALLING A ARD ISK RIVE
2