I
H
NSTALLING
ARDWARE
Installing the HDD Backplane (2.5"
SKU)
Prerequisite:
Prerequisite:
Remove the HDDs. See Removing a 2.5" Hard Drive on
page 2-4.
Remove the top cover. See Opening the Top Cover on
page 2-2.
Remove the expander backplane. See Removing the
Expander Backplane on page 2-31.
1. Align the HDD backplane with the screw holes in the
chassis.
Front
Figure 2-49. Installing the 2.5" HDD Backplane
2-36
I
HDD B
(2.5" SKU)
NSTALLING THE
ACKPLANE