Installing Pci-E Riser Assembly - QUANTA STRATOS S210 Series S210-X12MS Technical Manual

I H
NSTALLING ARDWARE

Installing PCI-E Riser Assembly

Prerequisite: Prerequisite:
Open the top cover. See Opening the Top Cover on
page 2-2.
1. Align the assembly with the guide pin hole in the chassis.
Figure 2-35. Installing the PCI-E Riser Assembly (1 of 2)
2. Insert the linking board into the connector on the main-
board.
3. Secure the assembly to the chassis with one (1) screw.
Figure 2-36. Installing the PCI-E Riser Assembly (2 of 2)
1.
2-28
I PCI-E R A
NSTALLING ISER SSEMBLY