QUANTA STRATOS S210 Series S210-X12MS Technical Manual page 168

I H
NSTALLING ARDWARE
5. In the Policy Configuration field, check Enable if you
wish to enable the policy settings.
6. In the Policy Set field, choose any of the Policy set from
the list.
7. In the Channel Number field, choose particular channel
from the available channel list.
8. In the Destination Selector field, choose particular desti-
nation from the configured destination list.
Note:
LAN Destination has to be configured under
PEF > LAN Destination
for destination selector in Alert Policy Entry page, then you have
to configure the 4th slot (LAN Destination Number 4) in the LAN
Destination tab.
9. In the Alert String field, enable the check box if the Alert
policy entry is Event Specific.
10.In the Alert String Key field, choose any one value that is
used to look up the Alert String to send for this Alert Pol-
icy entry.
11.Click Add to save the new alert policy and return to Alert
Policy list.
12.Click Cancel to cancel the modification and return to Alert
Policy list.
13.In the Alert Policy list, to modify a configuration, select the
slot to be modified and click Modify.
Configuration >
. That is if you select the number 4
14.In the Modify Alert Policy Entry Page, make the neces-
sary changes and click Modify.
15.In the Alert Policy list, to delete a configuration, select the
slot and click Delete.
PEF Management LAN Destination Page
This page is used to configure the Event filter, Alert Policy and
LAN destination. A sample screenshot of PEF Management
LAN Destination Page is given below.
Figure 4-26. PEF Management LAN Destination
The fields of PEF Management – LAN Destination Tab are
explained below.
4-33
C G
ONFIGURATION ROUP