QUANTA STRATOS S210 Series S210-X12MS Technical Manual page 153

I H
NSTALLING ARDWARE
Table 4-27: Active Directory Settings Page (Continued)
I
TEM
The name that identifies the role group in the
Active Directory.
Role Group Name is a string of 255 alpha-

Role Group ID
numeric characters.
Special symbols hyphen and underscore are

allowed.
This name identifies the role group in Active
Directory.
Role Group Name is a string of 255 alpha-

Group Name
numeric characters.
Special symbols hyphen and underscore are

allowed.
The domain where the role group is located.
Note:
Domain Name is a string of 255 alpha-
Group Domain 
numeric characters.
Special symbols hyphen, underscore and dot

are allowed.
Group Privilege The level of privilege to assign to this role group.
Add Role Group To add a new role group to the device.
To modify that role group. Alternatively, double
Modify role Group
click on the configured slot.
Delete Role Group To delete an existing Role Group.
Procedure:
Entering the details in Advanced Active Directory Settings Page
D
ESCRIPTION
4-18
1. Click on Advanced Settings to open the Advanced
Active Directory Settings Page.
Figure 4-14. Advanced Active Directory Settings Page
F
2. In the Active Directory Settings Page, enter the following
details.
3. Active Directory Authentication: To enable/disable
Active Directory, check or uncheck the Enable checkbox
respectively.
Note:
If you have enabled Active Directory Authentication, enter the
required information to access the Active Directory server.
4. Specify the Domain Name for the user in the User
Domain Name field. e.g. MyDomain.com
5. Specify the time (in seconds) to wait for Active Directory
queries to complete in the Time Out field.
Note:
Default Time out value: 120 seconds.

Range from 15 to 300 allowed.

C G
ONFIGURATION ROUP