Exit Screen - QUANTA STRATOS S210 Series S210-X12MS Technical Manual

BIOS
Table 3-35: Security
S I O
ETUP TEM PTIONS
Set Setup
Administrato
Administrator
r Password
Password.
User Set User
Password Password.
H T C
ELP EXT OMMENTS
Not available if
Administrator
Password is not
set.

Exit Screen

The Exit screen allows the user to choose to save or discard
the configuration changes made on the other screens. It also
provides a method to restore the server to the factory defaults
or to save or restore a set of user defined default values. If
Restore Defaults is selected, the default settings, noted in bold
in the tables in this chapter, will be applied. If Restore User
Default Values is selected, the system is restored to the default
values that the user saved earlier, instead of being restored to
the factory defaults.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Main Advanced Chipset Server Mgmt
Discard Changes and Exit
Save Changes and Reset
Discard Changes
Restore Defaults
Save as User Defaults
Restore User Defaults
Boot Override
UEFI: KingstonDT 101
SATA: Ht.-DT-St DVDRAM
SATA: WDC WD25OOKSO
AMI: Virtual Floppy0 1.00
IBA GE Slot 0600 v1360
UEFI: Built-in EFI Shell
Version 2.10.1208 - Copyright (C) 2010 American Megatrends, Inc.
Figure 3-34. Exit Screen
3-42
S
ECURITY
Boot Security Save & Exit
Exit system setup without
saving any changes
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: Genenal Help
F8: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
S
CREEN