Installing A Gpgpu4 Module - QUANTA STRATOS S210 Series S210-X2A2J Technical Manual

I H
NSTALLING ARDWARE

Installing a GPGPU4 Module

Prerequisite:
Remove the top cover. See Opening the Top Cover .
To install the GPGPU modue, make sure to remove the dummy
bracket from the GPGPU bracket if present. See Removing a
GPGPU Dummy Bracket .
1. Align the screw holes on the GPGPU riser card with the
screw holes on the GPGPU4 assembly bracket.
CAUTION!
!
A GPGPU
VOID DAMAGING THE
-
OVER LOAD THE SCREWS
. M
MODULE AKE SURE NOT TO
.
2. Secure the GPGPU riser card to the assembly with the
screw(s).
Installing GPGPU Riser Card
3. Align the screw holes on GPGPU4 assembly bracket with
the screw holes on the assembly.
4. Secure the brackets to the assembly with the screw(s).
2-42
I GPGPU4 M
NSTALLING A ODULE
10~11 kg/cm