I
H
NSTALLING
ARDWARE
2.10. Processor Heat Sinks
Note:
S210-X2A2J system cooling capability can only support proces-
sor with 1U thermal profile requirement, cannot support proces-
sor with 2U thermal profile requirement.
Removing a Heat Sink
WARNING!
!
The heatsink remains hot after the system has been powered
down. Allow sufficient time to cool before handling system com-
ponents.
Prerequisite:
Remove the top cover. Removing a Top Cover .
Remove the GPGPU3 assembly. See Removing a
GPGPU3 Module .
Remove the mainboard air-duct. See Removing a Main-
board Air Duct .
1. Loosen the captive screw(s) securing the heat sink to the
mainboard.
4
Removing Heat Sink
2. Remove the heat sink.
3. Repeat for the additional heat sink.
2-61
P
H
ROCESSOR
EAT
1
3
2
S
INKS