Remote Session - QUANTA STRATOS S210 Series S210-X2A2J Technical Manual

BMC
2. Enter the port number in the Port Number field.
3. Enter the time out value in seconds in the Time out field.
4. Enter the address of the server in the Server Address
field.
5. Enter the authentication secret for RADIUS Server in the
Secret field.
6. Click Save to save the entered details.
7. Click Reset to reset the entered details.

Remote Session

In MegaRAC SP, use this page to configure virtual media con-
figuration settings for the next redirection session. Encryption is
disabled by default.
To open Remote Session page, click Configuration > Remote
Session from the main menu. A sample screenshot of Remote
Session Page is shown in the screenshot below.
Remote Session
The fields of Remote Session Settings Page are explained
below.
Remote Session Settings Page
I
TEM
Enable/Disable encryption on KVM data for the
KVM Encryption
next redirection session.
Enable/Disable encryption on Media data for the
Media Encryption
next redirection session.
Two types of VM attach mode are available:

Virtual Media Attach
Mode

To save the current changes.
Note:
Save
It will automatically close the existing remote
redirection either KVM or Virtual media sessions,
if any.
Reset To reset the modified changes.
Procedure:
1. In KVM encryption, check or uncheck the option Enable.
2. In Media Encryption, check or uncheck the option
Enable.
4-38
C
ONFIGURATION
D
ESCRIPTION
Attach: Immediately attaches Virtual Media to
the server upon bootup.
Auto Attach: Attaches Virtual Media to the
server only when a virtual media session is
started.
G
ROUP