Bmc Network Configuration - QUANTA STRATOS S210 Series S210-X2A2J Technical Manual

BIOS

BMC Network Configuration

pt o Setup Ut ty Copy
Main Advanced Chipset Server Mgmt Boot Security
BMC network configuration
BMC LAN Port configuration [Shared-NIC]
Shared-NIC
Configuration Source [Do Nothing]
IP address source [BMC running DHCP]
Station IP address 0.0.0.0
Subnet mask 0.0.0.0
Station MAC address 00-00-00-00-00-00
Router IP address 0.0.0.0
WARNING: If change IPv6 configuration, BIOS will
wait for BMC setting after save and exit.
IPv6 Mode [No Change]
Current IPv6 Mode [Enabled]
IPv6 IP Address Source
[Do Nothing]
Current IPv6 IP Adress Source [Dynamic]
IPv6 IP Address
-> [0000:0000:0000:0000:0000:0000:0000:0000]
IPv6 Prefix Length 0
IPv6 GateWay Address
-> [0000:0000:0000:0000:0000:0000:0000:0000]
V i 2 14 1219 C i ht (C) 2011 A
BMC Network Configuration Screen
BMC Network Configuration
S I O
ETUP TEM PTIONS
Current BMC
LAN Port
State
g t (C) 0 e ca egat e ds, c.
Save & Exit
Select to configure LAN channel
parameters statically or
dynamically (by BIOS or BMC).
Unspecified option will not
modify any BMC network
parameters during BIOS phase.
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: Genenal Help
F8: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
i M t d I
H T C
ELP EXT OMMENTS
Information only.
Displays the cur-
rent BMC LAN Port
State.
BMC Network Configuration (Continued)
S I O
ETUP TEM PTIONS
[Do Noth-
ing]
Configura- [Static on
tion source next reset]
[Dynamic on
next reset]
IP address
source
Station IP
address
Subnet mask
Station MAC
address
Router IP
address
3-35
S M
ERVER ANAGEMENT
H T C
ELP EXT OMMENTS
Select to configure
LAN channel
parameters stati-
cally or dynami-
cally (DHCP). Do
nothing option will
not modify any
BMC network
parameters during
BIOS phase.
Information only.
Displays the IP
address source.
Available if Config-
Enter station IP uration Address
address. source is static on
next reset.
Available if Config-
uration Address
Enter subnet mask.
source is static on
next reset.
Information only.
Displays the MAC
address.
Available if Config-
Enter router IP uration Address
address. source is static on
next reset.
S
CREEN