Dns - QUANTA STRATOS S210 Series S210-X2A2J Technical Manual

BMC
9. In the Active Directory Settings Page, select a blank row
and click Add Role Group to open the Add Role group
Page as shown in the screenshot below.
Add Role group Page
10.In the Role Group Name field, enter the name that identi-
fies the role group in the Active Directory.
Note:
Role Group Name is a string of 255 alpha-numeric charac-

ters.
Special symbols hyphen and underscore are allowed.

11.In the Role Group Domain field, enter the domain where
the role group is located.
Note:
Domain Name is a string of 255 alpha-numeric characters.

Special symbols hyphen, underscore and dot are allowed.

12.In the Role Group Privilege field, enter the level of privi-
lege to assign to this role group.
13.Click Add to save the new role group and return to the
Role Group List.
14.Click Cancel to cancel the settings and return to the Role
Group List.
To modify a Role Group
15.In the Advanced Directory Settings Page, select the row
that you wish to modify and click Modify Role Group.
16.Make the necessary changes and click Save.
To delete a Role Group
17.In the Advanced Directory Settings Page, select the row
that you wish to delete and click Delete Role Group.

DNS

The Domain Name System (DNS) is a distributed hierarchical
naming system for computers, services, or any resource con-
nected to the Internet or a private network. It associates the
information with domain names assigned to each of the partici-
pants. Most importantly, it translates domain names meaningful
to humans into the numerical (binary) identifiers associated with
networking equipment for the purpose of locating and address-
ing these devices worldwide. In MegaRAC GUI, the DNS
Server settings page is used to manage the DNS settings of a
device.
4-21
C G
ONFIGURATION ROUP