Installing A Gpgpu3 Module - QUANTA STRATOS S210 Series S210-X2A2J Technical Manual

I H
NSTALLING ARDWARE

Installing a GPGPU3 Module

Prerequisite:
Remove the top cover. See Opening the Top Cover .
To install the GPGPU modue, make sure to remove the dummy
bracket from the GPGPU bracket if present. See Removing a
GPGPU Dummy Bracket .
1. Align the screw holes on the GPGPU riser card with the
screw holes on the GPGPU3 assembly bracket.
CAUTION!
!
A GPGPU
VOID DAMAGING THE
-
OVER LOAD THE SCREWS
2. Secure the GPGPU riser card to the assembly with the
screw(s).
. M
MODULE AKE SURE NOT TO
.
10~11 kg/cm
Installing GPGPU Riser Card
3. Align the screw holes on GPGPU3 assembly bracket with
the screw holes on the assembly.
4. Secure the brackets to the assembly with the screw(s).
2-33
I GPGPU3 M
NSTALLING A ODULE