End Of Cooking Cycle; Rapid Cooling - Distform MyChef 4 GN 2/3 Installation, Use And Maintenance Manual

7.10 End of cooking cycle

When the cooking cycle has finished, the appliance will signal the end visually and
with a beep. Specifically:
- The chamber light turns on and off for 30 seconds.
- Three beeps of 2 seconds each will be heard with 10 seconds in between.
- END will appear in the time/probe display until the user ends the cooking
cycle.
To end cooking, push the

7.11 Rapid cooling

The appliance has a rapid cooling system. This mode may be used as long as the
oven is not cooking or cleaning.
The convection fan turns on in this mode and the heating element turns off. The
fan does not switch off when the door is opened. The fan, along with the open
door, can lower the chamber temperature in just a few seconds.
To enter rapid cooling mode, push the
Once this mode is selected, the chamber probe display will continuously show the
chamber temperature. To enter rapid cooling mode, briefly push
Be aware that, in this mode, the convection fan runs when the door is
open. Take proper precautions.
Figure 35: End of cooking cycle signal.
button.
153
button for a few seconds.
.