Adding A Phase; Deleting A Phase - Distform MyChef 4 GN 2/3 Installation, Use And Maintenance Manual

Figure 30: Example of program 2, with four phases, and phase 2 is active.
The active phase will blink, and, when it is blinking, the others will remain
marked.
It is possible to add or delete phases to the program during the last phase.
7.7.2

Adding a phase

To add a phase, briefly press the
display. Confirm the addition of a phase by holding down the
Once a phase has been added, the phase's cooking settings can be changed as
specified in the previous subsections.
7.7.3

Deleting a phase

To delete a phase, briefly press the
display. Confirm the addition of a phase by holding down the
button until ADD appears in the program
Figure 31: Adding a phase.
button until DEL appears in the program
Figure 32: Deleting a phase.
151
button.
button.