Multi-Time; Start Of Cooking Cycle - Distform MyChef 4 GN 2/3 Installation, Use And Maintenance Manual

7.8

Multi-time

The multi-time mode allows different times to be assigned to each oven tray.
To enter multi-time mode, push the
(manual program) appears in the program display. Then, press the
again until T01 appears in the program display. This means you are editing the
cooking settings of tray 1.
Figure 33: Program button and display indicating time for tray 1.
Change the tray by briefly pressing the
allows you to select different oven trays.
The cooking settings for each tray can be changed as specified in the previous
subsections.
Changing the cooking mode, humidity, temperature, etc, of one tray will
affect the rest. Changing the cooking time of one tray WILL NOT affect
the rest.
To leave multi-time mode, push the
(manual program) appears in the program display.
7.9

Start of cooking cycle

Once the cooking settings are selected, whether in manual mode or a default
program, you can start the cooking cycle.
To start the cycle, press the START/STOP button, and the indicator light will turn
on.
Figure 34: START/STOP button illuminated.
152
button and turn the knob until "---"
button and turning the knob. This
button for a few seconds until "---"
button