Distform MyChef 4 GN 2/3 Installation, Use And Maintenance Manual page 21

Letter Function
W
START/STOP button
X START/STOP light
Y Turning knob
Z Phase button
A1 Program button
B1 Program display
C1 Phase display
Description
Starts and stops the oven.
If the oven is turned off, hold down the
button for two seconds to turn on.
If the oven is turned on but not cooking,
pressing the button briefly will start the
cooking cycle.
If the oven is turned on and cooking,
pressing the button briefly will stop the
cooking cycle.
If the oven is turned on but not cooking,
hold down the button for two seconds to
turn off.
Indicates the state of the oven.
If the oven is turned off:
Light off = oven not connected to
electricity
Light blinking every 3 seconds = oven
connected to electricity
If the oven is turned on:
Light off = oven not cooking
Light on = oven cooking
Light blinking every second = oven cooking
and in preheating mode.
Changes various cooking settings, which
were previously selected by pressing the
appropriate button (temperature, humidity,
time, etc.)
Selects phase.
Selects program.
Indicates program being used.
Indicates phase being used.
Table 9: Control panel description.
142