Reading Parameters; Aiming System; Good Read Green Spot Duration - Wasp WDI4200 Quick Reference Manual

Reading Parameters

Reading Parameters
Move the reader toward the target and center the aiming pat-
tern and illumination system to capture and decode the image.
See "Using the Wasp WDI4200" on page 4 for more informa-
tion.
The aiming system will briefly switch off after the acquisition
time, and if no code is decoded will switch on again before the
next acquisition. The illuminator will remain on until the symbol
is decoded.
As you read code symbols, adjust the distance at which you are
holding the reader.

Aiming System

A number of options for customizing control of the Aiming Sys-
tem are available. See the Wasp WDI4200 PRG for more infor-
mation and programming bar codes.

Good Read Green Spot Duration

Successful reading can be signaled by a good read green spot.
Use the bar codes that follow to specify the duration of the
good read pointer beam after a good read.
GOOD READ GREEN SPOT DURATION
ENTER/EXIT PROGRAMMING MODE
Short (300 ms)
Disabled
Long (800 ms)
Medium (500 ms)
= default value
Quick Reference Guide 19