List Of Messages - Canon PoverShot SD430 User Manual

List of Messages
The following messages may appear on the camera's LCD monitor
when an error occurs during a camera and printer connection.
(Depending on the printer model, some messages may not
display.)
Please refer to the printer's user guide for solutions.
No Paper
No Ink
Paper and ink do not
match
Paper Jam
Paper Error
Ink Error
Recharge the printer
battery
Readjust trimming
Hardware Error
File Error
Print error
Paper cassette is incorrectly inserted or out of
paper. Or the paper feed is not operating correctly.
The ink cassette has not been inserted or has run
out of ink.
The paper and ink are from different sets.
The paper jammed during printing.
The paper is not correctly set in the printer.
The ink casette is experiencing a problem.
The printer's battery pack is depleted.
You attempted to print the image with a different
style than the one used when the trimming settings
were set.
Check whether or not an error other than a paper
or ink error has occurred.
You tried to print an image that is not compatible
with PictBridge. Some images that have been
recorded with another camera or modified using a
computer cannot be printed.
There is an error in the settings. Turn off the printer
and turn it on again, then set the print settings
correctly.
Disconnected
Connection failed
A wireless connection has not been successfully
established or an established connection has been
cut. In such a case, first take whichever of the
following steps is or are appropriate: shorten the
distance between the camera and the wireless
- - - - - - - - - print adapter; change the direction of the camera
and the angle of the adapter; change the channel
settings. Then establish a wireless connection
again. For the setting method, please see the
Advanced Camera User Guide.
30 - - - - - - - - - - - - - - - -