Canon PoverShot SD430 User Manual page 254

821
Wireless Network Settings for the Computer and Camera
12
After confirming the displayed settings, click
[Print] to print out the configuration
contents.
This information will be necessary if you cannot
make a connection or later change the settings.
Store this information in a secure place because it
is important information about your computer.
13
After the printing finishes, click [Next].
14
Click [Finish].
;& Register Tilrgel Device
21i
STEPT STEP2 ,"lrJ STEP4
~~~hc~dconhgurahon
»
Set Connecbon Infollnatton
»f "''')
h" n
~
(j"
<>.
»
Finish ConfIguration
,,1!
Regfsler Tilrgel Device
?&
STEPT STEP2 STEP3 '[{'4
~~dConftguration
»SelConnechonlnformdtlon
»ReglsleronCamera »f"ll<=h "ngu.;;t!""u
15
When [Registration completed] appears on
the LCD monitor, press the FUNC.lSET button.
This registers the network configuration on the
camera.
16
Press the camera's MENU.
The camera will return to the playback mode.
17
Turn off the camera.
The Camera Control Window on the computer screen will close.
18
Detach the interface cable and connect wirelessly.
Please use the procedures in
Connecting
to test the correction operation of the wireless
connection (p. 85).