Canon PoverShot SD430 User Manual page 249

Checking Your Wireless Network Configuration (Configuration
m
Only)
If you are already using a wireless network, check the following settings and note them in the
checklist.
Checklist
77
• Network Name (SSID, ESSID)
1 _ _-
• Network Authentication/Data
Encryption (Encryption Method,
Encryption Mode)
o
Invalid
o
WEP (Open)
o
WEP (Shared Key)
o
WPA-PSK-TKIP
o
WPA-PSK-AES
• Encryption Key (Network Key)
1_ _-
• Key Index (Transmit Key)
o
1
o
2
o
3
o
4
Please enter the name assigned to
the wireless network you are using.
II
Network Authentication/Data
Encryption
II
is the encryption method
for data during a wireless
transmission.
Enter a check mark beside the
method used by your wireless
network.
The Encryption Key is the key used to
encrypt data during a wireless
transmission. Confirm the key used in
your wireless network. (Be extremely
careful in handling it since it is vital
information.)
The Key Index is a key that is set
when the Network Authentication/
Data Encryption setting is WEP. Up to
four keys can be set for one access
point. Please place a check mark
beside the key index used by your
wireless network.
Before configuring the wireless settings, confirm whether or not the supplied software has
been installed.
If the software is not yet installed, use the supplied Canon Digital Camera Solution Disk and
install it according to the procedures in Using the Software on the Windows Platform-The
Basics (p. 19).