Canon PoverShot SD430 User Manual page 139

eYou attempted to register an
camera or a movie as a
eYou attempted to erase or edit a protected image, movie or
sound memo.
eToo many images have been marked with print settings, transfer
or slide show settings. Cannot more.
e(xx: number) Camera malfunction. Turn the power off and then
back on, then shoot or play back. A problem exists if the error
code reappears. Note the number and contact your Canon
Customer Support Help Desk. If an error code displays directly
after taking a picture, the shot may not have been recorded.
Check in mode.
eWireless connection has failed. Please follow the instructions
below corresponding to the number shown in the error message.
1
2
3
4
5
7
An error has occured when you set up a wireless connection to
a computer. Please refer to the
Software
&
Wireless
Guide.
Wireless connection has failed. Either shorten the distance
between the camera and the wireless print adapter; change
the orientation of the camera or the angle of the wireless print
adapter; or change the channel settings. Then establish a
wireless connection again.
When a large volume of images (around 1,000) is stored on the
memory card, it may not be possible to establish a wireless
connection. In such a case, use a memory card reader to store
the necessary images in a computer, then reduce the images on
the memory card and try again to establish a wireless connection.
r
(ii'
r+
o
-
117