Canon PoverShot SD430 User Manual page 123

Ending the wireless connection
Slide the mode switch to
I:B
(playback)
m(Wireless) Menu [Connect/Disconnect]
See Menus and Settings (p. 32).
Use the • or .. button to select [Discon-
nect], then press
@ .
• The
wireless connection will end.
• If displays during wireless connection, it means that the
connection is very good. The fewer the antennas displayed,
the worse the wireless connection is. When
T
and the
wireless lamp both blink, it indicates an extremely bad
connection. In such a case, shorten the distance between
the camera and the wireless adapter.
• Please be aware of the points below when using a wireless
connection between the camera and a printer. Failure to
follow these instructions may terminate the connection.
- Do not use a wireless connection near to a microwave
oven or any other appliance which emits electromagnetic
waves.
- Do not put the camera and the printer far apart.
- Do not place objects in between the camera and printer.
• If a number of
~ireless
print adapters are available for
connection, select [Target Device] and press the
DISP.
button to confirm which wireless print adapter you can
connect to. The lamp on the available adapter will blink in
the following sequence: blue, blue, orange.
• If you slide the mode switch while using a wireless
connection to a printer, the wireless connection will be
terminated.
• If you end the wireless connection while printing, printing
will be interrupted.
~
~.
CD
en
en
o
o
:::s
:::s
CD
~
(j"
:::s
101