List Of Messages That Appear On The Screen - Canon PowerShot SD780 IS DIGITAL ELPH User Manual

/;I-i~~,
of Messages that Appear on the Screen
If error messages appear on the LCD monitor, try one of the following
solutions.
No memory card
The memory card is not installed in the correct direction. Install the memory card
in the correct direction (p. 16).
Card locked!
The SD memory card or SDHC memory card's write protect tab is set to "Lock".
Unlock the write protect tab (p. 18).
Cannot record!
You attempted to shoot an image without the a memory card, or with a memory
card installed incorrectly. Install the memory card in the correct direction when
shooting (p. 16).
Memory card error (p. 52)
Contact your Canon Customer Support Help Desk as there may be a problem
with the camera.
Memory card full
There is not enough free space on the memory card to shoot (pp. 24, 55, 65, 79)
or edit images (pp. 120 - 125). Erase the images (pp. 28, 112) to open space for
new images, or insert an empty memory card (p. 16).
Change the battery pack (p. 15) , . . , .,.
No image.
There are no images recorded on the memory that can be displayed.
Protected! (p. 116)
Unidentified Image/Incompatible JPEG/lmage too large./RAWr,
Unsupported images or data, or corrupted image data cannot be displayed.
Images manipulated on a computer, that have had their file name changed, or
have been taken with a different camera may not display.
Cannot magnify!/Cannot rotate/Cannot modify image/Cannot
register this imag911Cannot
modify/Cannot
a~~ign
to eatAgory
Incompatible images cannot be magnified (p. 109), rotated (p. 120), edited
(pp. 120 - 125), registered to the start-up screen (p. 140), categorized (p. 118),
or added to a print list (p. 126).
Images manipulated on a computer, that have had their file name changed, or
have been taken with a different camera may not be magnified, rotated, edited,
registered to the start-up screen, categorized, or added to a print list.
Movies cannot be magnified (p. 109), edited (pp. 120 - 125), or registered to the
start-up screen (p. 140).
146