Table of Contents
Advertisement
108
AF-assist Beam is set to
[Off].
camera moves when
the shutter button is
pressed.
Subject is dark in
contrast to the
background.
Subject is too far away
for flash to reach.
eln dark places where it is difficult for
the camera to focus, the AF-assist
Beam will emit to assist focusing. As
the AF-assist Beam will not function
when turned off, set it [Onlto activate it
(p. 33). Take care not to obstruct the
AF-assist Beam with your hand when
used.
eSetting the self-timer to
rI]
(2
seconds) delays the shutter release
for 2 seconds and allows the camera
to stop shaking, thus preventing a
blurred image (p. 45).
Even better results can be obtained
by placing the camera on a stable
surface or
a
to shoot.
at the correct
eSet the flash to
Guide
eSet the exposure compensation to a
positive (+) setting (p. 56).
eUse AE lock or use the
rna.tQr'lnrt
function
eShoot within correct shooting
distance of the subject when using
the built-in flash (p. 128).
eRaise the ISO speed and then shoot
Advertisement
Chapters
Table of Contents
