Canon PoverShot SD430 User Manual page 273

• An IP address is a unique identifying number assigned to a device, such
as a camera or computer, connected to a network.
• A DHCP (dynamic host configuration protocol) server is a server
computer that issues IP addresses to cameras or computers on the
network.
<V
"Connection failed 2" and "Connection failed 3" Message
o
Cause
Wireless network settings are incorrect. The registration the target
device on the camera may have failed.
Solution 1:
Attach the camera to the computer with the interface cable and check the
following settings for the target device.
[Network Name (S5ID)]
[Network Authorization - Encryption]
How to Check the Registration Information
Perform steps 1-7 in Registering the Target Device with the Camera (p. 78), continue
with the procedures below and check the registration information.
Check the
¥oucan
chi"nge~,ourrE~giste:~~~
-l-_
ca mera
I
s MAC
address here.
Place a check mark in the box for [Change
registered information in camera].
Also use the above windows to confirm that the information recorded in the checklist
(p. 77) is correct.
Solution 2
If you configured the connection in the [Simple Mode], select the [Advanced
Mode] as described in Step 8 of Registering the Target Device with the
Camera (p. 80) and reregister the computer with the camera.
1101