Registering The Target Device With The Camera - Canon PoverShot SD430 User Manual

7s1
Wireless Network Settings for the Computer and Camera
Registering the Target Device with the Camera
Attach the camera to the computer using the interface cable and register the target device
(computer to be connected wirelessly) with the camera. Configure the settings using the
Camera Wireless Setup program (a wireless configuration utility). This step is only required the
first time you register a target device.
-The camera cannot connect wirelessly to computers that have not been
registered as target devices.
- The camera can register up to 7 devices.
,
~
If your wireless network is already in use, confirm that the computer and router are
. correctly connected and that the router's wireless settings are correctly configured.
m
If there is a 1:1 direct connection between the camera and computer, confirm
that the computer1s wireless networking function is working.
2
Attach the supplied interface cable to the
computer1s USB port and the camera1s
DIGITAL terminal.
3
Turn on the camera and set it to the playback
mode.
The camera's
ddiltV'
(Print/Share) button will light
blue.
The Camera Control Window will appear on the
computer screen. Leave this window as is without
closing
it.
Playback
o.Q . . . .
1
Mode
.Q,¢v
~~~~~.
0 0 0 • •
r
Press the camera's button