Canon PoverShot SD430 User Manual page 90

eThis completes the setting.
elf you press the MENU button at this point, you will return
to the screen where you can select a My Colors mode.
e The default setting for color swap mode changes
green into white.
e You may not obtain the expected results after color
input mode if you use the flash, or change the white
balance or metering settings.
e The colors specified in the color swap mode are
retained even if the camera's power is turned off.
eThis completes the setting.
elf you press the MENU button at this point, you will return
to the screen where you can select a My Colors mode.
Select Adjust the
a color. color balance.
~ (Custom Color)
See Menus and Settings (p. 31).
Use the .. or .. but-
ton to select [Red],
[Green], [Blue] or
[Skin Tone] and the •
or .. button to adjust
the color balance.
eThe altered color will display.
Setting the Camera to a Custom Color Mode
This mode allows you to adjust the color balance for red,
blue and skin tones.
68