Canon PoverShot SD430 User Manual page 88

66
Setting the Camera to the Color
Accent Mode
Colors other than the color specified on the LCD monitor are
shot in black and white.
~
(Color Accent)
See Menus and Settings (p. 31).
eThe camera will switch to
color input mode and the
display will alternate
between the original image
and the color accent image
(using the previously set
color).
Aim the camera so that the color you
wish to retain appears at the center of
the LCD monitor and press the .. but-
ton.
eOnly one color can be specified.
e You can use the .. or ... button to specify the range
of colors that are retained.
- -5: Only takes the color that you want to retain
- +5: Also takes colors close to the one that you want
to retain
IFUNC\
\illJ •
eThis completes the setting.
elf you press the MENU button at this point, you will return
to the screen where you can select a My Colors mode.
e The default color accent is green.
e You may not obtain the expected results after color
input mode if you use the flash, or change the white
balance or metering settings.
e The specified color accent is retained even if the
camera's power is turned off.