Canon PoverShot SD430 User Manual page 276

1041
Using the Wireless Networking Function
'V
"Connection failed 7" Message
o
Cause
More than approximately 1000 images in the camera, you may not be able to
download the camera images in this case.
Solution:
Use a memory card reader to download the images. (p. 22)
'V
"Disconnected" Message
o
Cause
Could not detect the access point the target device.
Or the wireless network environment was poor and the connection was
broken.
Or connection confirmation signal processing failed.
Solution 1:
Change the camera1s orientation.
Solution 2:
Bring the camera near the wireless LAN router or other access point device.
Solution 3:
Confirm that the wireless LAN router or other access point device is
operating.
See the user guide for the wireless LAN router or other access point device.
Solution 4:
Change the channel of the wireless LAN router or other access point device.
Solution 5:
Confirm that the target device's (compute(s) wireless networking function is
operating correctly.
Solution 6:
Enable the receipt of an ICMP echo request in your firewall'settings.
See Enabling the Receipt of
leM?
Echo Requests (p. 105) for details.