Canon PoverShot SD430 User Manual page 256

841
Wireless Network Settings for the Computer and Camera
~
If the
II
Insufficient space in camera
II
message appears, delete target devices that are
LjJ
not needed and proceed to the next step.
12
After confirming the displayed settings, click
[Print] to print out the configuration
contents.
This information will be necessary if you cannot
make a connection or later change the settings.
Store this information in a secure place because it
is important information about your computer.
13
After the printing finishes, click [Next].
14
Click [Finish].
~RegisterTargetOevice
l"isJ
STEPT STEP2 El~ STEP4
~~~~cfonhgUlatiOn
»SetConnectlonlnformatlon».;., lslt:
1s '-fn"'r.!'$
»
FlnlshConhguratlon
~!WlisterTargetDe\ilce
" ,
'1%1
STEPT STEP2 STEP3 ,EFl
~~':f~dConflgura!lOn
»SelConnectlonlntorrnatroo» RegfSlet.onCameta »f
l~h
. . . .
:J
IL,U-:l
«1
15
When [Registration completed] appears on
the LCD monitor, press the FUNC.lSET button.
This registers the network configuration on the
camera.
16
Press the camera's MENU button.
The camera will return to the playback mode.
17
Turn off the camera.
The Camera Control Window on the computer screen will close.
18
Detach the interface cable and connect wirelessly.
Please use the procedures in Connecting to test the correction operation of the wireless
connection (p. 85).