Canon PoverShot SD430 User Manual page 252

80
I
Wireless Network Settings for the Computer and Camera
8
Select [Simple Mode] and click [Next].
We recommend you use the Simple Mode for
most purposes.
~~islerTafgetDevice
III
'F~1 STEP2 STEP3 STEP4
~:~;~:\;:r{~J
. .
J !~ »
Set Connection Informahon »Reglster on Camera
»
Finish Conhgurahon
Please select the configuration method
Firt.t,s;electlheconflgUiationmode
QAdv.ncedMod.
Selectthisifyotj.arefam~ia(withwireles:snetwotkemilonmentsandneedtornake
advanced settings
o
Change rt3gisleredinfofmalion in camera
!«ReturntoBeginningj
f§fA
·We recommend you use the [Advanced Mode] if the following
LjI
conditions apply to your computer1s wireless configuration.
• You are configuring an ad hoc network.
• You are performing the settings within a network with a system
adm inistrator.
• The computer and wireless LAN router are connected by a cable.
• A fixed IP address is assigned. (IP address: an identifying number
assigned to a computer or other device on a network)
• Wireless LAN router is not equipped with a DHCP server function.
(DHCP server function: short for dynamic host configuration protocol
server function, which assigns dynamic IP addresses to devices in a
network)
• You can change the registered information in the camera if you place a
check mark beside [Change registered information in camera] and click
[Next].