Correcting The Balance; Programming Pattern Repeat - Bernina COLLEGE 455 User Manual

> To call up further setting options, touch the icon «Stitch length» (1).
1

Correcting the balance

Different fabrics, threads and stabilizers can affect the programmed stitch patterns so that they cannot be
sewn out correctly. The electronic balance can correct these deviation and the stitch pattern can be adjusted
optimally to the selected fabric.
> Select a stitch pattern or alphabet.
> Sewing stitch pattern.
> Touch the icon «i»-Dialog.
> Touch the icon «Confirm».
– A preview of the stitch pattern is displayed.
> To correct the longitudinal direction of the stitch pattern, turn the «Lower Multifunction knob» until the
preview of the stitch pattern matches the stitch pattern sewn on the fabric.
> Altered balance settings can be saved for each stitch in the «Personal memory».
> Altered balance settings only remain valid until the «clr button» is pressed or the machine is switched off.

Programming pattern repeat

Stitch patterns can be repeated up to nine times.
> Select a stitch pattern or alphabet.
> Touch the icon «i»-Dialog.
> To repeat the stitch pattern, touch the icon «Repeat pattern» once.
x > To repeat the stitch pattern up to nine times, touch the icon «Repeat pattern» repeatedly.
> To switch off the stitch pattern repetition, touch and hold the icon «Repeat pattern» or touch the icon
«clr».
Creative sewing
55